D44 door system without thermal insulation/ D44 door system without thermal insulation

The authorized area

Main

About

Profile systems

Coating

Dressing The polymeric Anode covering

Program TALSOFT

Buy online

Objects

News

Contacts

Main Products D44 door system without thermal insulation

D44 door system without thermal insulation

Certificates:
Certificate "Qualicoat" on the polymer coating
Certificate for aluminum profiles "Alyupol"
License for design and tech. supervision

Profile system TPV-360 is designed for making partitions, stained glass Windows and doors with glazing bead, sliding balconies and Windows without thermal brake.

Doors D44 can be:
- single door;
- two-field;
- inward opening;
- opening outward;
- impost;
- without the impost;
- single glazing 4 mm, 5 mm, 6 mm;
- glazing with 20mm, 22mm or 24mm;
- with a threshold or without a threshold;
- balcony (with swing-out fittings;
- installed in the vestibule with the upper hollow fill.

The thickness of the door: boxes with a 36 mm fabric - 44 mm.

The padding thickness of 4 mm, 5 mm, 6 mm, 20 mm, 22 mm, 24 mm is pressed through the seals to the blade or transom-bar door by means of special clamping glazing beads. Between the bead and filling the wedge-shaped gasket is installed.

Swing doors are manufactured from profiles with "Euro" standard hardware for Sobinco hardware, Roto, Siegenia, Savio, Fapim, Stublina, KinLong, etc.

Doors can be embedded in any wall or façade using a special profile of the door frame or attached in a separate opening.
Using rotary-folding accessories, you can make a "window" of door profiles or balcony door.

In the manufacturing of doors we recommend to use door hinges for the "Euro" standard hardware profiles.

Used in the door threshold height of 3 mm.

The complexity of manufacturing of doors series TPV-360 is reduced through: use of standard connectors – inserts, leveling plates, simple operations of Assembly of corner joints "on the screws" or calking, installation of door hinges in "Euro" standard hardware does not require additional processing, the application of wedge gaskets, fittings under the "Euro"standard hardware.

Partitions TPV-360 can be:
- single glazing of 3 mm, 4 mm, 5 mm, 6 mm, or not filling glass 10 mm;
- glazing glazing or infill 20 mm, 22 mm, 24 mm;
- one medium bolt medium or more bolts, or without middle beams;
turning the racks from +105º to -105º (including all of the standard angles from 90º to 180º) round aluminum pipe ø60мм;
- with T-shape and ┼-shape dock lines stands around a circular aluminium tubes ø60мм;
- the reception without amplifier with moment of inertia Jx=30,7 4;
- the reception with a steel amplifier moment of inertia Jx=85,9 M4;
- with the possibility of installing in the partition of external and internal doors opening TPV-360;
- with the possibility of installing in the partition sliding Windows with single glazing.

Swing doors are manufactured from profiles with "Euro" standard hardware for Sobinco hardware, Roto, Siegenia, Savio, Fapim, Stublina, KinLong, etc.

Doors can be embedded in any wall or façade using a special profile of the door frame or attached in a separate opening.
Using rotary-folding accessories, you can make a "window" of door profiles or balcony door.

In the manufacturing of doors we recommend to use door hinges for the "Euro" standard hardware profiles.

Sliding window and balcony TPV-360 can be:
- in a tape aperture;
- in the septum-stained glass;
two-, three-, four-leaf or multi-leaf in a tape aperture;
- single glazing 4 mm, 5 mm, 6 mm, or not filling glass 10 mm.

In the manufacturing of doors we recommend to use door hinges for the "Euro" standard hardware profiles.

Used in the door threshold height of 3 mm.

The complexity of manufacturing of doors series TPV-360 is reduced through: use of standard connectors – inserts, leveling plates, simple operations of Assembly of corner joints "on the screws" or calking, installation of door hinges in "Euro" standard hardware does not require additional processing, the application of wedge gaskets, fittings under the "Euro"standard hardware.

Filling in the partition TPV-360 fixed by means of EPDM-seals the bead.
The rack can be mounted on the floor (ceiling) with supports (inserts). Possible breakout principle Assembly and installation of partitions with detent for upper and lower crossbars.

The crossbars are mounted on the uprights using inserts with fixing pin.

Aluminium profiles series TPV-36 are pressed from the alloy AlMgSi 0,5 (6060, 6063) and in accordance with DIN EN 573. This alloy is resistant to corrosion and allows to produce high precision profiles to DIN EN 755.Profiles sizes can vary within tolerances on dimensions and thicknesses in accordance with the requirements of DSTU B V. 2.6.-3-95 (GOST 22233), UNI 3879, 755 DIN, DIN 17615.

Coating aluminum profiles powder paint with a minimum thickness of 70 microns on all visible surfaces, in accordance with the international scale RAL colors or special colors. The coating is applied electrostatically to the polymerization at a temperature of 160-200 ° C. Preliminary surface preparation of aluminum profiles prior to coating, chroming, or anodizing - coating the oxide layer with a thickness of 6 μm by electrochemical – EN. ACS.6. Possible colorless anodizing – An.ACS.21, or other colours to order.

Seals – elastomer profiles are used for sealing: glass, sandwich panels, joints of the door leaf with box, to create a thermal and sound barriers, to seal against ingress of moisture from outside. The material of EPDM or porous EPDM. The seals retain their properties in the environment of air under all types of atmospheric effects in the temperature range of not narrower than -30 to +60 deg C.

Hardware – oriented profiles made in the doors "Euro" standard hardware – this allows you to use high-quality fittings from leading European companies for this type of doors.
Fasteners must be of stainless material.
The dimensions of the cutting of aluminum profiles listed in the catalogue are theoretically exact. The recommended tolerance for frame elements +0.5 mm, for sash -0,5 mm.

Contiguity – the joints of the finished structures with openings are not required. They can be considered as typical solutions for the problem of the installation of structures.
In determining the size of openings should consider the following factors: wind pressure in the room, the moments of inertia of the profiles, the dimensions and the weight of the glass or fill, the dimensions of the opening of the valves, the bearing capacity of the accessories, the type and number of fixings to the supporting structures.

The estimated ambient temperature is determined according to SNiP 2.01.01-82 "Construction climatology and Geophysics".
Humidity is determined according to SNiP II-3-79 "Construction machinery".

Standards are needed additionally:
"Blocks VCON dern. This." DSTU B. V. 2.6 - 23: 2009.
"Doors of aluminium alloys. Otoo." GOST 23747-88.
"The window blocks made of aluminum alloys. TU." GOST 21519-2003
"Bearing and enclosing structures" construction norms and rules 3.03.01-87.
"Building structures. Design standards" SNiP II-23-81.
"Metal construction. Rules of production and acceptance of work" SNiP III-18-75.
"Loads and effects. Building norms and rules" SNiP 2.01.07-85.
"Astanova W proektuvannya light prozora the elements of agoragalerij structures" DSTU-N B V. 2.6.-83: 2009.
"Aluminum structures" SNiP 2.03.06-85.

Glass and filling must be made according to the dimensions specified in our catalog.

Products